Profile Machine PVC Ceiling Panels Production Line /Plastic ceiling board extruder /pvc ceiling panel extruder making machine

PVC WPC  wall panel making machine
PVC WPC wall panel extrusion line is suitable for producing the wall pane. The wall panel can be coated with colorful decorative films. The PVC WPC wall panel has the advantage of fire proof, anticaustic, moisture proof,moth proof, mildew proof, non-toxic and environmentally friendly. The profile are widely used in interior decoration, etc.



Model
PVC WPC wall panel making machine details1,Main extruder2,Mold for PVC WPC wall panel3,Cooling and calibranting machine4,Haul off machine 5,Cutting machine
PVC WPC wall panel making process

1,Raw material mixer
Function:Mixing all raw materials together by hot mixer and  so then can compound well,then cooling by the cold mixer prevent reaction.
Working process:Automatic loading feeder--6-10min hot mixing--10-15min cooling
In order to avoid pollution, the mixer needs to be alone in a room. In addition, the mixed raw materials can be stored in silos, then transported directly from the silo to the extruder.

2,PVC ceiling profiles extrusion line
Function and working process:
Automatic loading ----Conical double screw extruder ---die mould---calibrator platform cooling----haul off device---Automatic cutting machine---Productus stacker

Special design screw  for PVC powder extrusion,SIEMENS brand motor,famous brand gear box,with automatic loading and feeder

In order to cooling the products well,adopt the cauum pump and water pump,two sets water tank.All parts contact with water are made by stainless steell.

The haul off device clamped the products by the rubber block, then the movement of the rubber block pulls the product forward.

Automatic cutting machine can customized cut the final products at the required length .
It has the functions of measuring cutting and accumulative counting.It adopt with the dust collector avoid pollution.

Carry and support the cutted final product, and then arrange neatly.
Made of stainless steel, the slide rail is equipped with a rubber protective layer.

3,PVC wall panel mould
We can design the mold according your requirments,mould material: 3cr17,the special high-quality mold steel
We offer the mold for 60 /65/80/85  series PVC window and doors,the co-extrusion type for ASA surface and sealing rubber.

4,PVC WPC wall panel surface treatment machine
Ceiling surface treatment mainly includes three types: film coating, rolling coating and spraying, among which the film-coated board is the best.

The surface treatment and process of the film-covered board are the same as the pre-coated board, except that the surface of the film-covered board is (PVC film). The surface of the film-covered board is adhered firmly, without wrinkles, scratches, or falling off.

5,SWP360 Plastic crusher
The crusher used to recycling the waste products ,then cutting them into small flakes.

6,SMW-500 high speed PVC Grinding machine
The high speed PVC grinding machine used to milling the PVC flakes into powder,so the waste PVC products can be recycled use.

7,20HP Water chiller :HANGKANG ANGES  brand,Danfoss compressor
Cooling the recycle water which used to cooling the products,
so it can increace the production speed and get good products surface.

8,30A air compressor
Provide the air to the mold,cylinder for haul off device,cutter,and stacker